How to Install Android 7.0 Nougat on PC

Firstly You have to download Android Nougat Iso Image From Here

Then download rufus to make android bootable usb from Here

Then Follow the given steps:

Step 1: Restart your computer.

Step 2: Boot from usb and you should see a screen like this.
            Select the Install android x86 to harddisk option

Step 3: Then you should see a page like this.
            Select create/modify partition option

Step 4: Then select 'No' on next screen.

Step 5: Now you will enter into linux based disk management system.On the botton Select 'New'                     option and hit enter.

Step 6: Then select primary and hit enter.

Step 7: Now again hit enter.

Step 8: Now select 'Bootable' and hit enter..

Step 9: Then select the last option i.e 'Write' and hit enter.Then you have to type yes and hit enter.

Step 10: Then Select the quit option and hit enter.

Step 11: Then select the hard disk you we created. In my case it is named VBOX HARDDISK

Step 12: Then select Format with 'ext4' and click on ok.Now it will format the partiton with ext4 file                 system.

Step 13: Then after formatting is done,on next screen select the option 'yes'.

Step 14: Then on next screen select 'skip'.

Step 15: Then on next screen select 'yes'.

Step 16: After the process is complete,you will see a screen like this.Now reboot you PC.

Step 17: Now you can see the boot menu.Select the first option.

        Step 18 :  Congratulation,You have sucessfully installed android nougat on your PC.

How to Connect to any wifi network With Cmd

It’s quite easy to crack if you follow our steps carefully. This trick will work with most of the wifi devices that have old hardware( modems and routers). For general knowledge, there are two types of wifi keys WEP and WPA. Both are explained below:

1: WEP: Wired Equivalent Privacy (WEP) is one of the widely used security key in wifi devices. It is also the oldest and most popular key and was added in 1999. WEP uses 128 bit and 256-bit encryption. With the help of this tutorial, you can easily get into 128-bit encryption and Hack WiFi password using CMD.

2: WAP and WAP2: Wi-Fi Protected Access is an another version of WiFi encryption and was first used in 2003. It uses the 256-bit encryption model and is tough to hack. WAP2 is an updated version of WAP and was introduced in 2006. Since then it has replaced WAP and is now been used mostly in offices and colleges worldwide.

Below are some steps to hack wifi password using cmd. Follow them carefully and you might get one of your neighbors passwords.

KNOW WIFI PASSWORD USING CMD

Hacking a Wi-Fi device is not always easy. You have to be careful of so many steps. Otherwise, you might even get caught. For easy and secure hacking, one should use the command prompt (cmd). Cmd is one of the most used features of Windows that gives you access to almost everything on a system. If used properly, you can even get inside other remote systems. To know more about cmd hacking check out our articles here.

Steps to Know Wifi password using cmd:

1: Open command prompt by going to start and click on run command or enter windows+r, then type cmd and hit Enter

2: In command prompt window, type

netsh wlan show network mode=bssid

know wifi password using cmd

3: This command will show all the available WiFi network in your area

4: This is the last step. Just type:

      netsh wlan connect name=(wifi name )

      netsh wlan connect name=Mynet Sata1

and you will be connected to that WiFi network.

5: To disconnect it, type

netsh wlan disconnect

Removing a virus without using any anti-virus software

Virus is a computer program that can copy itself and infect computers.
The term "virus" is erroneously used to refer to other types of malware, including adware and spyware programs that do not have the reproductive ability.
A true virus can spread from one computer to another (in some form of executable code).
One of the ways by which a virus can infect your PC is through USB/Flash drives.
Common viruses such as 'Ravmon' , 'New Folder.exe', 'Orkut is banned' are spreading through USB drive .
Most anti virus programs are unable to detect them and even if they do, in most cases they are unable
to delete the file, only quarantine it.So in our post we use command prompt to remove harmful files that
any anti-virus can't. 


These are the steps.

Step 1: Run the command prompt by going to start and type cmd on the search programs and files.

Step 2:Select the virus affected drive

                 (drivename: )
examples
C:
J:
F:
D:
E:

Step 3:type attrib -s -h *.* /s /d then press enter

Step 4:type dir 

                the dir command shows you the content of the drive

Step 5:check if there is an unusual .exe file

                 if there's an autorun.inf file rename it
                 (rename filename.extension newfilename )

Step 6:by doing the following steps you can now acces the drive without affecting                    the virus

              Go to my computer

Step 7: Select the drive

Step 8:Delete the harmful files

             *you can also delete the harmful files using command prompt
              ( type del filename)

How To Resize/Move Partiton With Ease Us Partition Master

Resize/Move partition function in EaseUS Partition Master will help you:

• Extend partition - extend system partition to maximize computer performance, solve low disk space problem on a certain hard disk partition.
• Shrink partition - manage disk space better for different usage.
• Move partition - make the unallocated space behind the partition you want to extend.

How to resize/move partitions with EaseUS Partition Master?

1.First, download and install EaseUS Partition Master.

Download Here

When you want to resize (extend and shrink) and move an existing NTFS or FAT partition on a single hard disk drive or SSD, removable device like flash drive, memory card, there are three cases:

• Case 1 - Extend a partition.
• Case 2 - Shrink a partition.
• Case 3 - Move a partition.

How to extend a partition?

Is there any unallocated space behind the partition you need to extend? Please follow solution 1 if no, follow solution 2 if yes.

Solution 1 - Shrink one drive and extend C drive.

1. Run EaseUS Partition Master.

2. Right the drive behind system partition and select "Resize/Move partition".

3. Position the mouse pointer on the left partition and shrink it. After click OK, you will find unallocated space on the right side of C: drive.

4. Repeat step 2 and 3. Position the mouse pointer on the right of C: drive to extend it.

5. Click Apply to complete the process.

Solution 2 - Directly extend C drive when there is unallocated space behind it.

1. Run EaseUS Partition Master, right click C: drive and select "Resize/Move partition".

2. Position the mouse pointer on the right of C drive. Drag the handle to rightwards to extend C drive and click Ok.

3. Click Apply to complete the process.

How to shrink a partition?

1. Run EaseUS Partition Master. Right click it and select "Resize/Move partition".

2. Position the mouse pointer on the left partition handle. Drag the handle rightwards to shrink it.

3. Click OK. You will preview the decreased drive on the disk map.

4. Click Apply to complete the process.

Dual Boot Windows 10 with Linux fedora

I will Show you how to Dual Boot Windows 10 with Linux fedora

Windows 10 is already installed so you need to create a bootable usb or Cd of fedora.

You can get the ISO image from here

https://getfedora.org/en/workstation/download/

Step 1: Restart your pc and select CD-Rom from the boot menu

Step 2: select the first option as shown below

Step 3: Then select install to hard drive

                                                                                             








Step 4:Then Select the language and click on done.

Step 5:Then you have to do the partition.Click on installation destination.

                                                                                     












Step 6:Then you have to choose the hard drive and select the option "i will configure partitioning".After Doing this click on done.

Step 7:Then At the screen choose "standard Partition"from the drop down list.

Step 8:Then click on Unknown to get the list of partitions.Choose the partition and on the left side                   input the capacity you of drive you want.In my case the 31gb partition is of windows and i                   have reduced it to 20gb leaving 10gb for fedora.

Step 9:Then after doing this click on the "+"button in lower right corner as shown in above image.
            After clicking it a box appears asking for mount point and desired capacity.In my case i want               the partition only 10gb.After doing this click the add mount point button.

Step 10:Your partition is ready.Now click done on upper left corner.After clicking on it a dialog box                appears showing the changes will be made to make the partition.Select accept changes.

Step 11:Now we are ready for installation.Just click begin installation in the lower right corner of the              next screen

Step 12: Installation starts.Below the User settings there are options to set root password and create a               user.You can set the both.

Step 13:When the installation finishes Click on finish button.

Step 14:Reboot your pc. Now you can see the boot menu.The first option is of fedora and the last option is of windows 10 as shown in the image below.You have successfully dual booted your pc.